Hereare a few common symptoms of a bad or failing tailgate locking assembly that you can be on the watch for: 1. Power lock doesn't work. If you have a power-operated tailgate locking system, then you should be able to push a button to lock/unlock it. If you push the button and nothing happens, it could be that the locking assembly isn't Afterreplacing the rear brake shoes I went through the EPB calibration procedure which involved disconnecting the battery. After successfully completing this procedure the central locking system is not functioning by either the key fob or the door handle buttons. Has anyone else experienced this and if so how was the fault rectified. Fixtercan save you around 15% on many dealer and independent garage prices when you choose us to take care of your problem. Your central locking fitters will: Test your door lock operation. Test all the fuses in each circuit with in your car's central locking. Test the electrical relay. Putthe key in the ignition and turn it to the ON position, but do not try to start the engine. Instead, leave the key in the ignition for about 15 minutes.This should cause the anti-theft light to blink, signaling that your car has recognized your key. If not, turn it back off, wait at least 3 minutes with the key still in the ignition, and Turnignition switch to position II. Turn ignition switch to position 0 and remove key. Within 1 minute: Press and hold key lock button. Press unlock button 5 times. Remote control should now operate system. If not: Repeat procedure. Key remote control added or replaced. System malfunction. xaW1.

how do i reset my toyota central locking